![Load image into Gallery viewer, ShtokCustomWorx NPXL V3 LED Strip PCB Holder - Hilt Side - 1"](http://thesaberarmory.com/cdn/shop/products/SCW-V3-1-INCH-HOLDER-1_110x110_crop_center.jpg?v=1617824840)
![Load image into Gallery viewer, ShtokCustomWorx NPXL V3 LED Strip PCB Holder - Hilt Side - 1"](http://thesaberarmory.com/cdn/shop/products/SCW-V3-1-INCH-HOLDER-2_110x110_crop_center.jpg?v=1617824841)
ShtokCustomWorx NPXL V3 LED Strip PCB Holder - Hilt Side - 1"
Regular price £3.50
Unit price per
Here is the ShtokCustomWorx NPXL V3 LED Strip PCB Holder.
This is the hilt side and for 1" emitters. It is also designed for the both the long pins AND short pins.
OD: 1"
Height: 7.0mm
Note that, for use with Long Pins, the order will include a lens cover. This is required for use with the long pins V3 NPXL PCB or long pins ECO V3 PCB. If you do not use a lens cover when using the long pins PCB you can risk bending or damaging your pins. You can choose from the selection above.
Machined from black ABS. It is not compatible with any third-party PCB.
This holder is MagConnect compatible when using short pins only.
Magnets are sold separately here.
They are for the V3 ShtokCustomWorx NPXL PCB or ECO V3 PCB connectors.
Please note, the magnets are a snug interference fit. They will still need be glued in so the force of the magnets do not pull them out when near each other. We recommend a low viscosity CA glue for this. Be careful when doing this; the magnets are fragile.
Also, it is important to note that due to the tolerances, be sure to check the fitting of the holder inside the hilt before the magnets have been put it and after. The addition of the magnets may expand the holder slightly resulting in a tighter fit. If this is the case, we recommend lightly sanding the outside of the magnets using a sanding drum to reduce the outer diameter slightly. This will stop the holder from expanding after installing the magnets.
Note that the PCB is press fit but it can be further secured using a small dab of hot glue or equivalent. It does also have 2 holes on each side of the holder should you wish to tap them and secure the PCB using screws.
Please be sure that before ordering, you are fully aware of the shipping policies outlined here: https://thesaberarmory.com/shipping-policies/
Terms and Conditions
Please read these Terms and Conditions (“Terms”, “Terms and Conditions”) carefully before using the https://www.thesaberarmory.com website (the “Service”) operated by KR Sabers Ltd. (“us”, “we”, or “our”).
Your access to and use of the Service is conditioned on your acceptance of and compliance with these Terms. These Terms apply to all visitors, users and others who access or use the Service.
By accessing or using the Service you agree to be bound by these Terms. If you disagree with any part of the terms then you may not access the Service.
Purchases
You are encouraged to familiarise yourself with your rights contained within the Sale of Goods Act 1979, Unfair Contract Terms Act 1977 and the Unfair Terms in Consumer Contracts Regulations 1999.
If you wish to purchase any product or service made available through the Service (“Purchase”), you may be asked to supply certain information relevant to your Purchase including, without limitation, your credit card number, the expiration date of your credit card, your billing address, and your shipping information.
You represent and warrant that: (i) you have the legal right to use any credit card(s) or other payment method(s) in connection with any Purchase; and that (ii) the information you supply to us is true, correct and complete. You expressly agree that KR Sabers Ltd. is not responsible for any loss or damage arising from the submission of false or inaccurate information.
By submitting such information, you grant us the right to provide the information to third parties for purposes of facilitating the completion of Purchases.
We reserve the right to refuse or cancel your order at any time for certain reasons including but not limited to: product or service availability, errors in the description or price of the product or service, error in your order or other reasons. You expressly agree that KR Sabers Ltd. cannot accept any liability for loss or damage arising out of such cancellation.
We reserve the right to refuse or cancel your order if fraud or an unauthorised or illegal transaction is suspected.
Returns
Please see our dedicated Returns Policy page here.
Cancellations
Please note, that unless specified otherwise in the item description, cancellations are permitted as long as requests are received in a reasonable time frame. From 2024, any cancellations or refunded payments will incur a 10% cancellation fee. PayPal and Shopify now do not reimburse payment processing fees after refunds are processed. Therefore if you place an order, and then decide that you would like to cancel it, the refunded amount will be net of a flat rate fee of 10%. This is to cover the payment processing fee and the administrative time spent processing the cancellation.
Shipping Policy
Our dedicated shipping policy can be found by clicking here. It is important to understand this prior to ordering.
Warranty (For ECO Lightsaber Products)
Limited Warranty covers defects in workmanship for the Product for a period of 6 months from the original date of Receipt from The Saber Armory. This limited Warranty does not cover any damage due to (1) acts of God, accident, misuse, abuse, negligence, improper handling, commercial use or modifications of this Product, or normal wear and tear; (2) improper operation or maintenance of this Product; or (3) attempted repair by any party other than The Saber Armory. This includes opening ECO Sabers in any place.
*This Limited Warranty does not apply where it is determined by The Saber Armory that there is no fault with the product itself. Repairs not covered by the Limited Warranty may, at The Saber Armorys’ discretion, be carried out at the owner’s expense.
You, the customer, are responsible for the cost of return shipping to and from The Saber Armory.
Component electronics, such as soundboards, batteries and/or LEDs are not warranted by The Saber Armory, since we do not manufature them.
*If you attempt to repair the item yourself, the warranty is VOID. We can still repair, but it will be at the buyer’s expense.
Warranty is non transferable.
GOTH3Designs Chassis Purchases
The PIY files and associated 3D models are for personal and nominative use only. These PIY files are non-refundable or exchangeable after purchase.
Commercial use is prohibited. The files and models may not be used in any way whatsoever in which you charge money, collect fees, or receive any form of remuneration.
The PIY Files, 3D models and resulting 3D printed chassis may not be resold or shared by any means with a third party.
These files are to be use on your own 3D printer only.
For ECO-Chassis (printed items), please note, it is not possible to cancel or exchange the purchase if the chassis has already been printed. We print all chassis to order and therefore cancellations or exchanges are not possible.
Administration Charges
Any manual administration of orders as a result of customer purchasing may incur an administration charge. These may include, but not limited to: Address changes, postal claims, shipping refund requests and order item changes. We recommend that customers ensure they review their information carefully before completing their purchase to avoid any of these charges.
Availability, Errors and Inaccuracies
We are constantly updating our offerings of products and services on the Service. The products or services available on our Service may be mispriced, described inaccurately, or unavailable, and we may experience delays in updating information on the Service and in our advertising on other web sites. You expressly agree that any such offer of a product or service does not constitute a legal offer capable of attracting legal consequences.
We cannot and do not guarantee the accuracy or completeness of any information, including prices, product images, specifications, availability, and services. We reserve the right to change or update information and to correct errors, inaccuracies, or omissions at any time without prior notice. Section “Availability, Errors and Inaccuracies” is without prejudice to existing statutory rights.
Contests, Sweepstakes and Promotions
Any contests, sweepstakes or other promotions (collectively, “Promotions”) made available through the Service may be governed by rules that are separate from these Terms. If you participate in any Promotions, please review the applicable rules as well as our Privacy Policy. If the rules for a Promotion conflict with these Terms and Conditions, the Promotion rules will apply. The terms and conditions of any other “Promotions” are independent of this agreement.
Pre-Order Items
For Pre-Order items it will not be possible to cancel after your purchase has been made. Once you have made the payment, you are committed to your purchase. There is no exceptions for this.
Accounts
When you create an account with us, you must provide us information that is accurate, complete, and current at all times. Failure to do so constitutes a breach of the Terms, which may result in immediate termination of your account on our Service.
You are responsible for safeguarding the password that you use to access the Service and for any activities or actions under your password, whether your password is with our Service or a third-party service.
You agree not to disclose your password to any third party. You must notify us immediately upon becoming aware of any breach of security or unauthorized use of your account.
You may not use as a username the name of another person or entity or that is not lawfully available for use, a name or trade mark that is subject to any rights of another person or entity other than you without appropriate authorization, or a name that is otherwise offensive, vulgar or obscene. You expressly agree that we cannot be held liable for any loss or damage arising out of any misrepresentations you make in this regard.
Intellectual Property
The Service and its original content, features and functionality are and will remain the exclusive property of KR Sabers Ltd. and its licensors. The Service is protected by copyright, trademark, and other laws of both the United Kingdom and foreign countries. Our trademarks and trade dress may not be used in connection with any product or service without the prior written consent of KR Sabers Ltd. Please note that KR Sabers Ltd. is not associated with LUCASFILM LTD. or any LFL Ltd. Film or Franchise
Links To Other Web Sites
Our Service may contain links to third-party web sites or services that are not owned or controlled by KR Sabers Ltd. .
KR Sabers Ltd. has no control over, and assumes no responsibility for, the content, privacy policies, or practices of any third party web sites or services. You further acknowledge and agree that KR Sabers Ltd. shall not be responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such content, goods or services available on or through any such web sites or services.
We strongly advise you to read the terms and conditions and privacy policies of any third-party web sites or services that you visit.
Termination
We may terminate or suspend your account immediately, without prior notice or liability, for any reason whatsoever, including without limitation if you breach the Terms.
Upon termination, your right to use the Service will immediately cease. If you wish to terminate your account, you may simply discontinue using the Service.
All provisions of the Terms which by their nature should survive termination shall survive termination, including, without limitation, ownership provisions, warranty disclaimers, indemnity and limitations of liability.
Indemnification
You agree to defend, indemnify and hold harmless KR Sabers Ltd. and its licensee and licensors, and their employees, contractors, agents, officers and directors, from and against any and all claims, damages, obligations, losses, liabilities, costs or debt, and expenses (including but not limited to attorney’s fees), resulting from or arising out of a) your use and access of the Service, by you or any person using your account and password, or b) a breach of these Terms.
Limitation Of Liability
In no event shall KR Sabers Ltd. , nor its directors, employees, partners, agents, suppliers, or affiliates, be liable for any indirect, incidental, special, consequential or punitive damages, including without limitation, loss of profits, data, use, goodwill, or other intangible losses, resulting from (i) your access to or use of or inability to access or use the Service; (ii) any conduct or content of any third party on the Service; (iii) any content obtained from the Service; and (iv) unauthorized access, use or alteration of your transmissions or content, whether based on warranty, contract, tort (including negligence) or any other legal theory, whether or not we have been informed of the possibility of such damage, and even if a remedy set forth herein is found to have failed of its essential purpose.
Disclaimer
Your use of the Service is at your sole risk. The Service is provided on an “AS IS” and “AS AVAILABLE” basis. The Service is provided without warranties of any kind, whether express or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose, non-infringement or course of performance.
KR Sabers Ltd. its subsidiaries, affiliates, and its licensors do not warrant that a) the Service will function uninterrupted, secure or available at any particular time or location; b) any errors or defects will be corrected; c) the Service is free of viruses or other harmful components; or d) the results of using the Service will meet your requirements.
Exclusions
Without limiting the generality of the foregoing and notwithstanding any other provision of these terms, under no circumstances will KR Sabers Ltd. ever be liable to you or any other person for any indirect, incidental, consequential, special, punitive or exemplary loss or damage arising from, connected with, or relating to your use of the Service, these Terms, the subject matter of these Terms, the termination of these Terms or otherwise, including but not limited to personal injury, loss of data, business, markets, savings, income, profits, use, production, reputation or goodwill, anticipated or otherwise, or economic loss, under any theory of liability (whether in contract, tort, strict liability or any other theory or law or equity), regardless of any negligence or other fault or wrongdoing (including without limitation gross negligence and fundamental breach) by KR Sabers Ltd. or any person for whom KR Sabers Ltd. is responsible, and even if KR Sabers Ltd. has been advised of the possibility of such loss or damage being incurred.
Governing Law
These Terms shall be governed and construed in accordance with the laws of England and Wales, without regard to its conflict of law provisions.
Our failure to enforce any right or provision of these Terms will not be considered a waiver of those rights. If any provision of these Terms is held to be invalid or unenforceable by a court, the remaining provisions of these Terms will remain in effect. These Terms constitute the entire agreement between us regarding our Service, and supersede and replace any prior agreements we might have between us regarding the Service.
Changes
We reserve the right, at our sole discretion, to modify or replace these Terms at any time. If a revision is material we will try to provide at least 30 days notice prior to any new terms taking effect. What constitutes a material change will be determined at our sole discretion.
By continuing to access or use our Service after those revisions become effective, you agree to be bound by the revised terms. If you do not agree to the new terms, you must stop using the service.
Privacy Policy and Cookie Policy
Please refer to our Privacy Policy and Cookies Policy. You agree that they constitute part of these terms. You must read our Privacy Policy and Cookies Policy before you use the Service.
Contact Us
If you have any questions about these Terms, please contact us.
KR Sabers Limited
Registered office address: 24 Crossways, Sutton, SM2 5LB, United Kingdom
UK Company Number: 08885309